SIMPLORER User Manual V6.0 - FER-a

Data Set Format
SIMPLORER 6.0 — Manual 469
• n-dimensional value sets are possible. Each record containing n values has to be positioned
on one line (limited to 255 ASCII characters per record).
• The k values are separated by a separator character (also after the last value per line!)
usually the semicolon (;) - space characters are then ignored.
• All other special ASCII characters are also possible separators, except for the decimal
point (.) and the space.
• If the separator is not the semicolon, the separator must be specified in the data set identification
file as the SEP:= parameter, e.g., SEP:="/".
• The data can be written in any standard number format used in data processing, e.g., 10/
10.0/ 1.0E1.
.mdx Files used of Components using 2D Characteristics
typ:=A
dim:=2
len:=6
end:=
0;0;
0.2;0.01;
0.5;0.02;
0.8;0.03;
1;2;
1.5;200;
.mdx Files used of Fourier Sources
typ:=A
dim:=3
len:=6
n01:=f
u01:=Hz
n02:=Amplitude
n03:=Phase
u03:=rad
end:=
50;0;0;
50;1;0;
100;2;0;
150;3;0;
200;4;0;
250;5;0;