SIMPLORER User Manual V6.0 - FER-a

Mass
Component Parameters
SIMPLORER 6.0 — Manual 329
Description [Unit] Parameter Name Data Type
Damping Coefficient [N*s/m]/Damping Coefficient [Nm*s/
rad]
DAMPING/DAMPING real
Component Outputs
Description [Unit] Parameter Name Data Type
Displacement [m]/Angle [rad] S/PHI real
Force [N]/Torque [Nm] F/M real
Velocity [m/s]/Angular Velocity [rad/s] V/OMEGA real
Component Nodes
Description Node Name Nature
Pin1-Pin2 Translational Damper TRB1-TRB2/TR1-TR2 translational/
translational_v
Pin1-Pin2 Rotational Damper ROTB1-ROTB2/ROT1-
ROT2
rotational/
rotational_v
>>Basics>Physical Domains>Mechanical>Displacement-Force-Representation
>>Basics>Physical Domains>Mechanical>Velocity-Force-Representation
The component represents a mass specified by a mass/inertia and initial position/velocity.
Ft () = M⋅a() t s() t = vdt + s0 v() t = adt + v0 Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the parameter meaning up
in the parameter table below.
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.
Component Parameters
∫
∫
Mt () = J⋅a() t ϕ() t = ωdt+ ϕ0 ω() t =
adt+ ω0 Description [Unit] Parameter Name Data Type
Mass [kg]/Mass Moment of Inertia [kg*m²] M/J real
Initial Position [m]/Initial Angle [rad] S0/PHI0 real
Initial Velocity [m/s]/Initial Angular Velocity [rad/s] V0/OMEGA0 real
∫
∫