SIMPLORER User Manual V6.0 - FER-a

Needle Pulses
SIMPLORER 6.0 — Manual 285
>>Basics>Tools>Time Functions
The function provides needle pulses with a defined amplitude and frequency after a delay to
the simulation start and a delay within the period at the output.
yt () = AMPL if t = TDELAY + T0 + ---------------
K
K∈N FREQ
AMPL
OFF
Dialog Settings
«Amplitude»
Defines the amplitude value. Common parameter type. Enter a numerical value, a variable,
or an expression in the text box.
«Frequency [Hz]»
Defines the frequency of the needle pulses. Common parameter type. Enter a numerical value,
a variable, or an expression in the text box.
«Delay [s]»
Defines the initial delay of the needle pulses. Common parameter type. Enter a numerical value,
a variable, or an expression in the text box.
«Delay within Period»
Defines the delay of the needle pulses within the period. Common parameter type. Enter a
numerical value, a variable, or an expression in the text box.
«Offset»
Defines the phase offset of the needle pulses. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� «Periodical»
In the list, select «Yes» for a periodical needle pulses; select «No» for carrying out only one
period corresponding to the defined frequency. After them the trapezoidal function is '0'.
Click the button to display the trapezoidal function with the defined values. Please note: If
you use variables for the definition, the preview is empty.
Component Parameters
TDELAY T0 1/FREQ
t
Description [Unit] Parameter Name Data Type
Frequency [Hz] FREQ real
Amplitude of Pulses AMPL real