SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 387
With the buttons and , the file format for all available data channels
can be selected or deselected at the same time.
When you click , the original storage options from the model file are restored.
Data Reduction Tab
Reduce extend of saving data
If this option is selected you can use the data reducing functions. The settings of these functions
are applied when you save data from the View Tool to files.
Sample rate for saving
The function determines how many of the data pairs are saved. For the value “1”, each data
pair is saved; for “2”, every other data pair; for “3”, every third pair, etc.
Lower/Upper boundary of saving rang for X-axis
These options set the X-axis range for data saving. You can choose between the minimum/
maximum of
• The active graphical display (e.g. a certain zoom area)
• The data provided of the simulator (simulation start and end time) or
• An own value.
Options for Storage of Simulation Data
Select the data type
Select the separator and
the format
Unformatted, Model_nameU.MDX
Formatted, Model_nameF.MDX
Final values, Model_nameE.MDX
Access database format
Excel format, Model_nameX.XLS
The menu OPTIONS>SETTINGS DATA provides two further options for saving simulation results.
You can turn off saving simulation data to files as specified in the simulation model and keep
the displayed simulation data in a additional file.