SIMPLORER User Manual V6.0 - FER-a

Properties of Rectangles, Circles, and Rounded Rectangles
In addition to the properties of the outline, you can
define the hatching and color of areas in rectangles,
circles, and rounded rectangles.
The following settings are available:
• Area as color sheet or hatching (EDIT>PROPER-
TIES «Style»)
• Color of the area (EDIT>PROPERTIES «General»)
• Outline or area (with or without fill in area in
EDIT>PROPERTIES «General»)
Properties of Polygons
The corners of the polygon are defined with a mouse
click. A double-click closes the drawing mode. You
can change the form of the selected polygon later by
moving the corners with the mouse pointer to a new
location (the mouse pointer becomes a cross).
For a polygon, you can define the outline and the color
for the area.
11.2.5 Arranging and Aligning Displays, Text, and Drawing Elements
Moving Elements
SIMPLORER 6.0 — Manual 355
Select hatching
and color
Select polygon and move the points
Component displays, text, and drawing elements can be aligned and moved independent of
the component grid. The ELEMENT>MOVE UP and MOVE DOWN commands move drawing elements
into the foreground or background. So you can change the sequence of them later.
To change the size of drawing elements, drag on the element handels with the mouse. If you
press, in addition, the SHIFT key, you can adjusting the size proportionally.
You can select each element on the sheet. When selected, an element is highlighted with a
red outline and the blue selection points become visible. You can move the element to a new
location by pressing and holding the left mouse button. To select unfilled elements you must
click the element outline.