SIMPLORER User Manual V6.0 - FER-a

10
338 Physical Domains
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the parameter meaning up
in the parameter table below.
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Thermal Capacitance [J/K] C_TH real
Initial Temperature [K] T0 real
Component Outputs
Description [Unit] Parameter Name Data Type
Temperature [K] T real
Heat Flow [J/s] H real
Component Nodes
Description Node Name Nature
Pin 1 (with red point) TH1 thermal