SIMPLORER User Manual V6.0 - FER-a

Component Outputs
Dead-Time Element
SIMPLORER 6.0 — Manual 209
Description [Unit] Parameter Name Data Type
Block output signal VAL real
>>Basics>Blocks>Continuous Blocks
The block represents a delay of a number of simulation steps of the input signal with initial
values. The delay is specified as a number of samples.
yk ( ) = xk ( – NH)
for k > NH
yk ( ) = Y0( NH – k)
NH = Number of Samples
for k ≤ NH
y
Dead-time as a multiple
of the sampling period TS
Initial
value 0
Initial
value 2
Input signal after
the dead time
Initial value 1
Dialog Settings
«Initial Values»
Defines the initial values for k