SIMPLORER User Manual V6.0 - FER-a

12
372 Simulation Results
X Axis Tab
Displayed simulation
quantities on the Y-axis
Simulation quantity
on the X axis
Displayed part of a
complex number
Lists the available Y Axes
of the simulation quantity
Scaling and Offset
in the coordinate system
Types of markers
Curve format
Sliding Window
The Sliding Windows defines the maximum display of the X range. The window will be moved
during the simulation between the start and simulation end time.
Presentation
The settings define position, color, and the font of the inscription of the X axis.
Scale
You can set Linear or Logarithmic representation for the X axis.
The adaptation of presentation areas for the X and Y axes can be performed manually or automatically.
If automatic adaptation is selected, the simulation quantities are displayed at the
maximum size. The dimension defines the maximum extended channel. If automatic values
are not selected, the values entered for the axes scales are valid.
Grid Lines
You can define if grid lines are displayed in the diagram and the minimum number.
Data Format
You can select three different formats (12.3k/12.3E+3/1.23E+4) from the list and the number
of decimals («Fixed Mantisse»).