SIMPLORER User Manual V6.0 - FER-a

Using Templates
SIMPLORER prompt to convert a 4.x sheet
SIMPLORER 6.0 — Manual 343
To synchronize or convert libraries, start the FILE>INSTALL LIBRARY command in the Model
Agent and enter a name for the new library if the prompt to save appears.
When during the conversion process an ambiguous component definition occurs (the component
is contained in more than one installed library), an additional dialog is opened. Select
the component from the library you want and continue the process. Components with no
equivalent model in SIMPLORER 6.0 format is deactivated and hatched after loading the
sheet. See also “Converting 4.x Libraries” on page 485.
In the SSC Commander you can decide which file (if any) you want to use as a template for
new Schematic models.
Creating and Using Templates in the Schematic
1 Create a Schematic file with default elements for each new model sheet (drawing elements,
text elements with placeholders, Schematic settings and so on).
2 Save this file with the extension .ssh using FILE>SAVE AS or FILE>SAVE.
3 In the SSC Commander, select OPTIONS>PROGRAM DIRECTORIES to define the name and
path for the template file.
Path and name of template file
The elements of the template file are included in each new model file created with the template.
If you do not want to use a template file, omit the entries for path and name.