SIMPLORER User Manual V6.0 - FER-a

4
5
194 Modeling with Circuit Components
«Name»«Unit»«Description»
Displays the parameter names and their corresponding unit and description. You cannot
make changes in these fields. If you want to add user-specific information to a parameter use
the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Leakage Inductance Secondary Side [H] LS2 real
Winding Resistance Secondary Side [Ω] RCU2 real
Coupling Factor KTR real
Component Outputs
Description [Unit] Parameter Name Data Type
Voltage Secondary Side [V] V2 real
Current Secondary Side [A] I2 real
Component Nodes
Description Node Name Nature
Open Side Node A and B NX_A, NX_B electrical
Secondary Side Node A and B N2_A, N2_B electrical
4.8.2 Three-Phase Systems
• Six-winding Transformer (small power)
• Six-winding Transformer (large power)
• Primary Side of a Six-winding-Transformer
• Secondary Side of a Six-winding-Transformer
Six-winding Transformer (small and large power)
>>Basics>Circuit>Transformers>Three-Phase Systems
The component represents a transformer based on the Spiro model. For each coil make sure a
network path exists to the ground node. The macro does not provide an access to the initial
value of currents, these are assumed to be zero. Within the dialog you can define the main and
leakage inductances, the equivalent resistances for iron losses and the winding resistances
for each phase and side.