SIMPLORER User Manual V6.0 - FER-a

W 2
KTR = ------- with W1 = Windings Primary Side and
W1 =
Windings Secondary Side
Small Power
KTR11=0.5, KTR12=0.25, KTR13=0.75,
KTR21=0.5*KTR, KTR22=0.25*KTR, KTR23=0.75*KTR
Large Power
KTR11=0.5, KTR12=0.333, KTR13=0.667,
KTR21=0.5*KTR, KTR22=0.333*KTR, KTR23=0.667*KTR
SIMPLORER 6.0 — Manual 195
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the meaning up in the parameter
table below.
«Name»«Unit»«Description»
Displays the parameter names and their corresponding unit and description. You cannot
make changes in these fields. If you want to add user-specific information to a parameter use
the «Info» field in the component output dialog.
Component Parameters
W 2
Description [Unit] Parameter Name Data Type
Main Inductance [H] LM real
Leakage Inductance Primary Side Phase 1 [H] LS1_P1 real
Leakage Inductance Primary Side Phase 2 [H] LS1_P2 real
Leakage Inductance Primary Side Phase 3 [H] LS1_P3 real
Leakage Inductance Secondary Side Phase 1 [H] LS2_P1 real
Leakage Inductance Secondary Side Phase 2 [H] LS2_P2 real
Leakage Inductance Secondary Side Phase 3 [H] LS2_P3 real
Equivalent Resistance for Iron Losses [Ω] RFE real
Winding Resistance Primary Side Phase 1 [Ω] RCU1_P1 real
Winding Resistance Primary Side Phase 2 [Ω] RCU1_P2 real
Winding Resistance Primary Side Phase 3 [Ω] RCU1_P3 real
Winding Resistance Secondary Side Phase 1 [Ω] RCU2_P1 real