SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 465
5 Select the data set from the list. Define the data channels for the X and Z axes.
�
�
�
�
Select data set (simulation run)
Apply the selected data channel
for X-channel
Apply the selected data channel
for Z-channel
Click to apply the settings
Repeat steps 4 and 5 until all characteristics have the family parameter, the X and the Z
axes.
6 Define the file format and the range of the X axis of data in the next dialog. The maximum
range is set as default.
7 Define the number of samples. The maximum number existing
in one characteristic is set as default. Select the form of interpolation:
Spline- (curve) or linear interpolation. Click
.
8 Enter a file name for the characteristic file and click .
�
�
�
�
Defined family of
characteristics
All characteristics within the file have the same number of samples. The value of the family
parameter has to monotonous increase across the file.