SIMPLORER User Manual V6.0 - FER-a

Nyquist Plot
Channel Tab
SIMPLORER 6.0 — Manual 379
The Nyquist Plot and Nyquist Plot (con) are especially designed to display quantities of AC
simulations. In contrast to Display Elements, the Nyquist Plot has not Extern View function.
The assignment of simulation quantities for the X and Y axes is defined in the «Channels»
tab. All defined simulation quantities, the system time t, and the frequency f for both X and Y
axes are available. The frequency is set by default for the X axis.
You must define at least two quantities (signals) for the Y axis; the investigated output signal
and the base channel. Define the output channel, select the quantity in the tree and click the
new entry symbol to define the base channel.
To define color, marker, representation type, and line of the curve, click the button.
Also, a scale and shift factor for gain and phase can be entered for a quantity. See also
“Outputs in Quick View Elements” on page 370 and “Outputs in Connect View Elements” on
page 371.
Presentation Tab
See “Presentation Tab” on page 378 of Bode Plot.
Real Axis Tab
See “Frequency Axis Tab” on page 378 of Bode Plot.
Imaginary Axis Tab
See “Gain Axis Tab” on page 378 of Bode Plot.
Nyquist plot