SIMPLORER User Manual V6.0 - FER-a

Smooth
SIMPLORER 6.0 — Manual 441
Interval
Specify the interval the operation is applied to.
Cursor position
� Interval limits are set by the cursor (if cursor mode is active).
Complete area
� The whole curve is used.
Values
� Calculation for an individual interval according to a start and a stop value.
Destination
Select the destination device.
Overwrite channel
� The selected channel is overwritten by the new values.
Create new channel
� Specify name and unit of the resulting channel.
Start the computation.
Closes the input dialog without saving.
Quick display
If the box is checked, the computation results are immediately integrated into the corresponding
presentation (table).
Mean value computation and channel smoothing. This function is used to smooth simulation
or measurement data.
Data Sets
Select the requested data set.
Source
Select the channel to be smoothed.
Filter size
Number of samples.
Destination channel
� Overwrite channel: The original channel is overwritten with the smoothed data set.
� Create new channel: The smoothed data set is stored in a new channel.
Quick display
If the box is checked, the computation results are immediately integrated into the corresponding
presentation (table).