SIMPLORER User Manual V6.0 - FER-a

5
216 Modeling with Block Diagrams
Unit Delay
>>Basics>Blocks>Discrete Blocks
The block represents a delay of the of the input signal with the as sample time defined time.
You can define an initial value for the output signal.
yk ( ) = xk ( – 1)
TS = Value
Dialog Settings
«Initial Value»
Defines the value for t>Basics>Blocks>Discrete Blocks
The block provides several filter types for the block diagram module. The filter models are implemented
as a transfer function G(z) which is parametrized with parameter sets in the property
dialog. See also Schrüfer E.: Signalverarbeitung, C. Hanser, Verlag, 1992.
Dialog Settings
� «Filter»
In the list, select the Butterworth, Bessel, Tschebyscheff, or Cauer filter.