SIMPLORER User Manual V6.0 - FER-a

10
312 Physical Domains
Component Nodes
Description Node Name Nature
Pin 1 (with red point) H1 fluidic
Pin 2 H2 fluidic
Hydraulic Resistance
>>Basics>Physical Domains>Fluidic
The component represents a simple fluid resistance specified by a linear coefficient.
qt () =
K ⋅ p() t
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the parameter meaning up
in the parameter table below.
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Linear Coefficient [m³/(s*Pa)] K real
Component Outputs
Description [Unit] Parameter Name Data Type
Differential Pressure [Pa] P real
Flow Rate [m³/s] Q real
Component Nodes
Description Node Name Nature
Pin 1 (with red point) H1 fluidic
Pin 2 H2 fluidic
Hydraulic Capacitance
>>Basics>Physical Domains>Fluidic
The component represents a hydraulic resistance that also includes the effects of fluid compressibility,
or hydraulic capacitance. The characteristics are based on equations for laminar
and turbulent flow through a smooth round pipe supplemented with the differential equation
for effect of fluid compressibility.