SIMPLORER User Manual V6.0 - FER-a

Inserting Date, Time, and File Information
SIMPLORER 6.0 — Manual 351
You can also insert into each text element specific information about the model sheet, such
as the time and the date. This information is updated automatically as it changes.
You can insert the following information:
• Date and time
• Parameters of models
• Name of model file and name of project file
• System settings (simulation parameters, trigger times, outputs)
Inserting New Text with Placeholders
1 Start the text mode (DRAW>TEXT or text symbol
) and click with the left mouse button at the
desired insertion point in the sheet.
2 Click with the right mouse button the text field
and select «Insert Placeholder».
3 Select an entry in the «Category» window, the
type of the placeholder in the «Placeholder»
window and confirm with .
Select the placeholder
command
To select more than one entry in the list press the CTRL or SHIFT key and click all entries
you want. All entries are inserted with line break in the text element.
Select the category
Select placeholder
(if the CTRL or SHIFT key
is pressed, several entries
can be selected)
Confirm the selection with «Insert»
4 Click outside the text field in the sheet or press ESC; the size of the display of the placeholder
is automatically adapted to the corresponding information.
�
�
�
Display of the placeholder
Changed information
for placeholder
(date and time)