SIMPLORER User Manual V6.0 - FER-a

12
392 Simulation Results
Graphic Border
Defines the margin width of the graphic (for the axis inscription and the legend). You can set
the margin for the right, left, top and bottom margin separately.
Cursor Color
Sets the color used for the cursor. You can choose between channel color or the complementary
color of the channel color.
Next Simulation
With the option «Restore Window» the View Tool window is brought to the foreground at
each simulation run (refresh).
With the option «Load configuration» the saved arrangement of a former data analysis are
applied to the next simulation run.
With the option «Load configuration automatically» the active arrangement is saved when
the View Tool is closed. If you want to save the configuration with FILE>SAVE CONFIGURATION
clear this option, otherwise the saved settings will be overwrite when the View Tool is closed.
Zooming
Determines if the windows are arranged overlapped after a zooming process.
Grid Lines Tab
Linear Representation
You can set the number of horizontal and vertical grid lines independent from each other. The
defined number is used as a minimal value. This is because the View Tool tries to draw the
grid lines at “round” numbers. Therefore it may be necessary to draw more lines than specified.
Logarithmic Representation
You can set the number of horizontal and vertical grid lines per decade independent from each
other. If the number is 9 (grid lines at each “integer” value within the decades), additional grid
lines may be drawn at “tenth” of “integer” values. These additional grid lines will occur only
if the “normal” grid lines are less than a given number.
Screen Colors Tab
If you are doing an experiment with multiple simulations running in the background, the
«Next Simulation Restore Window» option should be deactivated.
Definition of grid line number for linear or logarithmic representation. The values in the input
control boxes can be modified only with the Buttons.
Common Colors
Click the corresponding color control box (double-click channel colors), and a dialog for color
selection appears. The following elements can be set: window background, graphic background,
graphic frame, X-axis, Y-axis, grid lines, X-inscription, Y-inscription.
Channel Colors
You can set arbitrarily much channel colors. Double-click an entry in the list to edit the colors.
You can create new colors with the icons on the top of list. With these buttons you can also
delete existing colors and change their order.