SIMPLORER User Manual V6.0 - FER-a

11
356 Schematic Environment
Arranging Elements
Aligning Elements
Elements may be hidden behind other elements
on the sheet. Depending on the
arrangement, the elements in the upper
level may hide the elements in the lower
level. You can change the sequence of arrangement
with the ELEMENT>MOVE UP /
MOVE DOWN menu commands. These
commands are always applied to the selected
element.
If several elements are selected at the same time, you can align these elements with their selection
points, either with the commands in the ELEMENT>ALIGN menu or the commands in
the standard toolbar.
Setting the Same Width and Same Height for Elements
Move to back
Move to front
The alignment is always oriented to the last selected element.
Aligning the Marked Elements on the Left Side
These commands adapt several selected drawing text and display elements to the same
height and width. The size for width and height is always oriented to the last selected element.
You can start these functions with the commands in the ELEMENT>SIZE menu or with
the commands in the standard toolbar.