SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 67
Search components on the sheet:
If you choose «Go to» on the shortcut menu of a component, it is moved to the center of the
window. (You may want to zoom in to enlarge the wiring enough to position your selection
more clearly.)
You can edit all model parameters, including simulation parameters and output quantities, in
the Object Browser. You need not open the component property dialog to change parameters.
3.6.2 Searching and Replacing Parameters and Text
With the search and replace function (EDIT SEARCH/REPLACE) you can search for parameters
and text in the model sheet and open the corresponding property dialog. Then you can define
new names and values and change former settings as you wish.
Search String
Search string
after replace
Search the next incidence
of the search string
Replace the search string
after confirmation
Replace all incidences
without confirmation
Options for the
search area
The EDIT>SEARCH/REPLACE function searches the entire text; that is, each character combination
is found regardless of its position in a word. The search can be restricted to a certain
range with different options.
Text elements: Search text elements which were created with the text tool.
Model names: Search names of models, subsheets, and simulation parameters
(only user-defined parameters can be changed).
Node names: Search for node names.
Parameter/Pin names: Search for parameter and pin names in models.
Parameter values: Search for parameter values in models.
Comments: Search for comments which are entered in the model’s information
field.
Outputs: Search for defined outputs (cannot be changed).