SIMPLORER User Manual V6.0 - FER-a

Displaying and Hiding Pins
SIMPLORER 6.0 — Manual 45
You can display and hide each pin within the component property dialog. Double-click the
symbol to open the property dialog and choose «Output/Display». Then select the «Pin» box
of each parameter which should be displayed on the sheet.
To select more than one entry in the list press the CTRL or SHIFT key and click all entries you
want. Then click with right mouse button in the list and select «Pin». Click and all
selected parameters and nodes get a pin on the sheet.
Dynamic Pins and Parameters
Moving Pins
Some components as Summation, Multiplier, States, or Equations have no fixed number of inputs
or parameters. If you create new pins within the property dialog Schematic arranges
these pins around the symbol on the sheet. You can recognize dynamic parameters (pins) by
the number in brackets in each name.
Dynamic pins of
a component
You can move all pins displayed on the sheet within the predefined grid. Start the moving pin
mode with CONNECT>MOVE PIN or with the symbol on the toolbar. The mouse-pointer changes
into a pointer with a four-headed arrow. Place the pointer on the component pin. If the
pointer changes into a four-headed arrow drag the pin with pressed mouse button to the new
place. Exit the move pin mode with .
�
Start the
move pin mode
Mouse pointer with
four-headed arrow
� � �
Place the pointer
on a pin
Move the pin to
a new place