SIMPLORER User Manual V6.0 - FER-a

Defining Parameters
Fixed Component Parameters
SIMPLORER 6.0 — Manual 49
To change names and parameters, click in the desired text box. The cursor appears, and the
text can be changed.
Input field of the Output of the name Component symbol
component name on the sheet on the sheet
Component parameters
Default simulation outputs
Press the TAB or the ENTER key to switch between the fields. If you click , the
changes are visible immediately on the sheet, and the «Output/Display» menu is updated
without forcing you to close the dialog box. Otherwise, click to save the changes.
Components without special wizard dialogs (physical domain models, VHDL-AMS models,
user-defined macros) use a dialog with a simple listing of the used parameters. In the list you
can only modify the value of a parameter. Entries in the «Name», «Default», «Unit», and «Description»
column cannot be changed.
To define the value of a parameter you can also use a pin. Click the «Output/Display» tab and
check the Pin box. If you use the pin for a parameter, you cannot change the entry in the «Value»
field.
Component parameters