SIMPLORER User Manual V6.0 - FER-a

Draw Menu �
Command Toolbar Symbol and Description
SIMPLORER 6.0 — Manual 507
SELECT Starts select mode (to alter or move shapes, lines, or text
blocks).
LINE Draws a line. Draw the line to the size desired by holding and
then releasing the mouse button.
POLY Draws filled or unfilled polylines and rectangles. You can
change this property within the property dialog.
To draw a polyline: Set the corners of the elements with the
mouse. Close the mode with a double-click. The line are closed
if the start and end points are placed at the same position. You
can change the form if you move the corners with the mouse
(the mouse pointer must be a cross arrow over the selected object).
To draw a rectangle: Draw the rectangle to the size desired by
holding the mouse button and the release the mouse button.
CIRCLE Draws filled or unfilled circles, semicircles, and segments. You
can change this property within the property dialog.
Draw the element to the size desired by holding the mouse button
and the release the mouse button. You can change the form
of segments when you move the corners with the mouse (the
mouse pointer must be a cross arrow over the red and green object
handles of the selected element).
ELLIPSE Draws filled or unfilled ellipses and elliptic segments. You can
change this property within the property dialog.
Draw the element to the size desired by holding the mouse button
and the release the mouse button. You can change the form
of elliptic segments when you move the corners with the mouse
(the mouse pointer must be a cross arrow over the red and green
object handles of the selected element).
TEXT Creates a text element. Click in the sheet and enter the text.
Double-click the text to open the property dialog. You can
change font, color, and the behavior on the sheet (rotable or
not).
PIN Creates a new pin. Click in the sheet and the pin are placed at
this position. You can insert pins only on level '0'. See also “Defining
Pins and Names” on page 506.
INTERACTIVE PANEL Creates an interactive panel. Draw the panel to the size desired
by holding the mouse button and then release the mouse button.
Double-click the panel to open the property dialog. See also
“Creating Interactions” on page 510.