SIMPLORER User Manual V6.0 - FER-a

Simulation Tab
SIMPLORER 6.0 — Manual 495
File Function
Model Bar Bitmap Defines a .bmp file 16x16 pixel used for the Model bar in the Schematic.
See also “Modifying the Model Bar” on page 344.
WinHelp File Defines a component help file in WinHelp format (.hlp file) and
HTML Help File HTML Help format (.chm file). Only one file for each help format
can be assigned. Both help files would be started when a link is
provided. If you use relative paths, make sure that the SIMPLOR-
ER help directory is configured in the right way. See also “«Default
Paths» tab” on page 21.
Example Defines a file which is connected with the model. All file formats
can be included. in the Working window opens
all files assigned in this table.
If you use relative paths, make sure that the SIMPLORER sample
directory is configured in the right way. See also “«Default Paths»
tab” on page 21.
C Model Defines the .dll file used of the model. (Only for C models.)
� � Intern If the box is checked for a file assignment, the file is included completely
in the model database, otherwise only the link is defined.
Embedded files in the model library causes a larger file size, but
you can exchange the library (.smd file) with all files.
The «Simulation» dialog contains the active macro call. You cannot make changes in this dialog.
With you can start the Symbol Editor to modify the component symbol. See also
16 “Symbol Editor” on page 499.
Conservative Nodes Tab
The «Conservative Nodes» dialog lists the connections (nodes) that are defined in the macro
text, C model, or internal component. You can enter a common description and the display
setting. To define a entry click the field in the respective column and enter the text. See also
“Conservative and Non-Conservative Nodes” on page 44.