SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 347
11.2.2 Displaying Names and Parameters of Components and Connections
Each component is defined by its name and its parameters. Schematic attaches and displays
these specifications directly on the sheet. There are many options for the representation of
names and parameters. Whether all the information can be displayed depends on the number
of components and the size of the sheet. You may modify a sheet according your personal preferences.
The following properties can be displayed:
• Pin names
• Component names
• Parameter values
• Node names
Displaying Node Names
For a selected connection the Properties menu can be opened with the right mouse button.
The «Label» option sets the display of the node names. If you move the label on the sheet, the
connection line goes to the next point at the wire.
Display the
node name for a
connection
Defining Displays for Parameter and Pin Names
Within the «Output/Display» dialog in the property menu of the components (blocks, states),
the format of the display can be supplemented. The «Show» column contains the settings for
graphical output. The drop down menu with the items is opened with a mouse click the
«Show» field. The meaning of the options is shown in the figure above.
If you cannot see the «Show» column, reduce the size of the first column by moving the sliders
to the left.
The «Complete» option means that all available outputs are displayed, as well as the information
field.
If the parameter pin is available on the sheet, the linking line of a defined display point at the
corresponding pin.