SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 47
Place the cross wire on a component pin on the sheet, and set the beginning, corners, and end
of the wire with the mouse. Press ESC to exit the wire mode.
Schematic checks the created model after the simulator starts. If connections are missing, an
error message or warning is displayed in the «Build» area of the Info Window. Double-click
the warning or error text to move the element with the wrong connection into the visible range
of the Schematic.
Properties of Connections
Valid starting point
for a connection
Invalid starting point
Correctly created connection
No connection
Connections are elements with modifiable graphic properties. Double-click a connection or
the choose EDIT>PROPERTIES to open the property dialog. In the «Connections» dialog the
name of the connection and the connected components are displayed. The «General» dialog
contains the graphic settings. See also “Displaying Node Names” on page 347.
�
�
�
�
�
�
�
Dialog for defining of screen and file outputs
Display of the components connected with the node
Settings for the graphic representation
Shortcut menu of a connection
�