SIMPLORER User Manual V6.0 - FER-a

12
382 Simulation Results
Time Window
The «Automatic» option carries out the calculation the complete simulation time. If the box
is clear, you can define your own calculation window.
Filter Amplitude [%]
Amplitudes smaller than the defined proportional value of the maximum are not displayed.
Percent Evaluation
If the box is selected, the maximum amplitude value is set to 100%; otherwise the value entered
in the field is used.
Result
Select «Absolute Value and Phase» or «Real and Imaginary Part» for the representation of
the results.
Window
Select the Rectangle, Triangular, Von-Hann, Hamming, Blackmann, Lanzcos, or Weber window
from the list. Select the rectangular window if you want to investigate a periodical signal.
Channel Calculator
The Channel Calculator carries out mathematical operations with quantities connect to the
pins and provides the result at one of the five output pins. In the sense of SIMPLORER Display
Elements the Channel Calculator represents a connect element.
Name
Defines the channel name used in Connect View Elements.
Expression
Click the expression field and open the edit dialog (…) to define mathematical expressions.
You can use only quantities connected to the input channels. Double-click a input name in
the calculator dialog list to insert the name in the input field.
12.2.3 Other Elements
File Launcher
In Addition to the View and postprocessing Display Elements there are the File Launcher and
Data Channels. The File Launcher is used to start other applications when a defined condition
becomes true. Data Channels provide a quantity of the simulation sheet to an Connect Display
Element. Besides you can save simulation data of Display Elements in a .mdx file.
The File Launcher starts a specified file when a certain condition becomes or is true. You can
select the frequency of starting with the Start Mode. The Connect Element has five inputs to
connect channels with quantities. In the expression dialog you can select connected channels
with a double-click.
Expression
Create, delete or move a entry with the icons placed on the upper right side. Click the expression
field and open the edit dialog (…) to define a logical expression. You can use all quantities
used in the simulation model. In a connect element you can use only quantities connected to
input channels. Double-click the quantity/input name in the edit dialog list to insert the values
in the input field.