SIMPLORER User Manual V6.0 - FER-a

12
386 Simulation Results
The View Tool provides multiple way to present simulation results:
• Using linear and logarithmic scales in coordinate systems
• Scaling and offsetting for each data channel
• Displaying data channel properties and characteristics
• Storing data in separate files
• Adding and removing of specified data channels
• Selectively zooming in on the coordinate system
12.3.1 Data Management
The File menu �
The Data Management menu commands store the waveforms (data channels) displayed in
the immediate graphical output and also control the printer.
The Save Data Command
Select Channels Tab
If you are using the Display Elements in a sheet, the View Tool does not start until you select
«Use View Tool for Output» in the SHEET>PROPERTIES «System» dialog.
Command Toolbar Symbol and Description
RELOAD LAST SIMU-
LATION
Shows the results of last simulation. Available only under the
following two conditions:
1) The «Don’t Clear Data Cache at Program End» option is active
in the OPTIONS>SETTINGS DATA.
2) The View Tool has been opened without first running a simulation
(e.g., by Windows Explorer).
SAVE DATA Saves data channels to disk in a format you select.
SAVE CONFIGURA-
TION
Saves all window and channel settings of the active task. If a
new simulation run is started, all settings of the saved configuration
are applied to the new data.
PRINT Prints the wave forms displayed on screen.
PREVIEW Page preview. The options for print layout are specified in Options>Settings
«Print Page».
SELECT PRINTER Opens the printer configuration menu.
EXIT Closes the View Tool and stops the running simulation.
All data channels selected for one storage format are stored together in one file. You can
change the default file name and path can be changed by the user, but Ansoft recommends
using the standard file extension because other SIMPLORER modules refer to these extensions.