SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 503
The lowest level is level '0'. Elements on the other levels are superimposed of elements in lower
levels (if the lower levels are visible).
With the symbols on the upper side, levels can be created and deleted. The and
buttons display or hide all levels of the active symbol.
Insert a level
Delete a level
Defining Sheet and Symbol Properties
Sets all levels visible Sets no levels visible
Active level
Visible levels
Invisible levels
Visible level
Invisible level
Active level
Inactive level
The settings in the VIEW>PROPERTIES menu are valid for the symbol sheet. The sheet properties
and the sheet itself (size and form) can always be edited independent of the active level.
The command is only available when the sheet is selected. In EDIT>PROPERTIES you can set
the resize feature of a symbol on the sheet. If the option is checked, you can adapt the symbol
size on the Schematic sheet.
Sheet Properties Symbol resize feature
You can adapt the sheet size by dragging on the blue sizing handles with the mouse pointer.
The sheet should be large enough for all elements to be placed on it.
Define sheet
size in the
Symbol Editor
Display in the Schematic
with filled area