SIMPLORER User Manual V6.0 - FER-a

Magnetic Flux Source
SIMPLORER 6.0 — Manual 317
>>Basics>Physical Domains>Magnetic
The component represents an ideal magnetic flux source which supplies the defined magnetic
flux for an arbitrary magneto-motive force. Within the dialog you can choose a constant or
time-controlled source.
Dialog Settings
� «Magnetic Flux [Vs]»
The linear magnetic flux source is selected. Common parameter type. Enter a numerical value,
a variable, or an expression in the text box or use the pin to connect a quantity.
� � «Use pin»
If the box is checked, the value is defined by the quantity connected to the pin, otherwise the
value in the text box is used.
� «Time Controlled»
The time-controlled flux source is selected. In the list, select a time function and define the
corresponding parameters. See also “Using Time Functions” on page 275.
� In the list, select the sine, pulse, triangular, trapezoidal, saw-tooth rising, or saw-tooth falling
time function.
Linear Magnetic Flux Source
FLUX() t =
VALUE
The magnetic flux is equivalent to the present value of the quantity specified in the text box.
Usually a constant value, a time function, or a variable are chosen, or the value is determined
in a state graph. All system quantities and variables can be combined with mathematical and
logical operators and constants.
The magneto-motive force of an ideal flux source can be arbitrary. Real flux sources have always
an internal resistance. If the internal resistance is essential for the simulation target, a
corresponding resistance must be connected in parallel.
Component Parameters
Description [Unit] Parameter Name Data Type
Magnetic Flux [Vs] VALUE real
Component Outputs
Description [Unit] Parameter Name Data Type
Magnetic Voltage [A] MV real
Magnetic Flux [Vs] FLUX real
Component Nodes
Description Node Name Nature
Pin 1 (with red point) MAG1 magnetic
Pin 2 MAG2 magnetic