SIMPLORER User Manual V6.0 - FER-a

11
340 Schematic Environment
Project Files
Command Toolbar Symbol and Description
SAVE ALL Saves all documents open in the Text Editor, prompting for a
file name when necessary.
PROJECT Switches to the SSC Commander window.
IMPORT Inserts the elements of a Schematic file into the active file.
EXPORT Exports the selected elements into a new Schematic file. There
are two supported version formats: .ssh file 6.0 (standard) and
.ssh file 5.0.
MODEL DESCRIPTION Creates a separate .sml or .vhd file from the active simulation
model (without starting a simulation). See also “Model Description”
on page 408.
PRINT Prints the active Schematic sheet. Defines the print pages, the
number of copies, and the destination (printer or file).
PRINT PREVIEW Displays a full-page view of the active Sheet. The print layout is
defined in SHEET>PAGE SIZE. See also “Printing Model Sheets”
on page 341.
PRINTER SETUP Defines the print options: paper size, paper feed, and format
(portrait or landscape).
SEND WITH E-MAIL Creates a new e-mail message, and attaches the active Schematic
sheet file. You can also set the option to zip the file and
include the .sdb file belonging to it. See also “Sending Simulation
Models in E-mails” on page 341.
«FILE LIST» List of the last 4 opened files.
EXIT Closes Schematic and prompts you to save any open documents.
The below dialog appears box if you have not included the document in the project, or if you
are saving it for the first time. If you click , the dialog box is displayed again if you save
the file under the same name.
Dialog box to add a file
to the active project