SIMPLORER User Manual V6.0 - FER-a

Simulator Outputs
SIMPLORER 6.0 — Manual 311
Description [Unit] Parameter Name Data Type
Pressure Differential [Pa] P real
Flow Rate [m³/s²] Q real
Component Nodes
Description Node Name Nature
Pin 1 (with red point) H1 fluidic
Pin 2 H2 fluidic
Time-Controlled Flow Source
qt () =
f[ time function]
The time controlled flow sources have the same properties as the linear flow source above;
the pressure can be arbitrary and the internal resistance is zero (ideal source). The value of
the flow rate instead is equivalent to the present value of the selected time function at each
calculation step.
Component Parameters
Description [Unit] Parameter Name Data Type
Amplitude [m³/s²] AMPL real
Frequency [Hz] (no trapezoidal function parameter) FREQU real
Period [s] TPERIO real
Delay [s] TDELAY real
Phase [deg] PHASE real
Angular Dimension n/a
Offset OFF real
Periodical; PERIO=1, periodical function, PERIO=0; non-periodical
function
PERIO real
Damping factor [1/s] (only sine function)
DAMPING>0, amplitude is exponentially decreasing
(damped). DAMPING