SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 57
Define the points with the mouse
The shortcut menu contains various curve-editing functions (Insert, Delete, Append
points).
7 To save the curve in SIMPLORER format, choose FILE>EXPORT and select .mdx file format.
If you want to save the graphic and the sampled curve, choose FILE>SAVE AS, and save
the Sheet Scan .ssf file.
To create more than one curve in a graphic, choose CURVE>NEW. Existing curves move to
the background. The CURVE>SELECT option brings the corresponding curve into the foreground,
so you can edit it.
3.5 Subsheets in Simulation Models
Dialog Curve Select
Large schematics may make it difficult to see your work clearly because the screen area is limited.To
use less screen space, subsheets, which allow you to structure the wiring and create
hierarchical models, can be integrated into the mainsheet and nested as much as you want.
If block diagrams are part of a subsheet, the block sequence is considered only within the single
subsheet; therefore, recursive operations with block diagrams could cause step delays
during simulation.
Descriptions created from a subsheet definition can be used to add macros to model libraries
in the Model Agent. Macros may be used in any model description, similar to each basic component
(drag-and-drop from the Model Agent).
Schematic offers two ways to create subsheets, graphical and as text. Graphical subsheets are
considered as SML models whereas text subsheets can be SML and VHDL-AMS models.
Subsheet symbols, used of the Schematic, can be modified.Choose «Edit Symbol» on the
shortcut menu to start the Symbol Editor and change the symbol.