SIMPLORER User Manual V6.0 - FER-a

Y Axis Tab
SIMPLORER 6.0 — Manual 373
Add/Delete Axis
The 2D Display Element supports multi axes graphic. To assign curves to a special coordinate
system with its own scaling you have to define a separate Y axis. Select «New Y Axis» from
the list and type a name and when necessary an additional information in the input fields below.
Click to create a new entry for an Y axis. All settings displayed in the dialog
are applied to the Y axis selected in the drop-down list.
Presentation
The settings define position, color, and the font of the inscription of the Y axis. The value of
«Fixed Width» assigns a fixed value for the display in the diagram.
Scale/Grid Lines/Data Format see X axis.
Presentation Tab
The Presentation dialog defines all properties of the diagram’s appearance. If a check box is
selected, the corresponding option is active. The name, defined in the text box, is used as title
in the representation on the sheet.
Graph Border
The graph border settings define the space between outer and inner frame of the Display in
percent.
Title (Name)
Grid lines
vertical
horizontal
Axes
Ordinate
Abscissa
Graph frame
Outer frame
Graph border
Left
Bottom
Legend
1st Y axis
2nd axis
Window
background
Graph
background
Color
The colors in the dialog define the presentation on the model sheet. Click the corresponding
color box to open the color menu to change the color.
Color Scheme
Schematic also offers predefined color schemes or the option to save user-defined color
schemes. To save your own color scheme set the colors in the dialog, type a new name for the
scheme in the input field and click . You can load an existing scheme when you select
a name from the list and click .
The selected colors are also used for printing. Black backgrounds are not recommended.