SIMPLORER User Manual V6.0 - FER-a

10
330 Physical Domains
Spacer
Component Outputs
Description [Unit] Parameter Name Data Type
Displacement [m]/Angle [rad] S/PHI real
Force [N]/Torque [Nm] F/M real
Velocity [m/s]/Angular Velocity [rad/s] V/OMEGA real
Acceleration [m/s²]/Acceleration [rad/s²] ACC/ACC real
Component Nodes
Description Node Name Nature
Pin1-Pin2 Translational Mass TRB1-TRB2/TR1-TR2 translational/
translational_v
Pin1-Pin2 Rotational Mass ROTB1-ROTB2/ROT1-
ROT2
rotational/
rotational_v
>>Basics>Physical Domains>Mechanical>Displacement-Force-Representation
The component represents a constant displacement between two components in a mechanical
system specified by a length.
vt ()
ds
= s = LEN
ω() t =
dϕ
ϕ =
LEN
dt
dt
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the parameter meaning up
in the parameter table below.
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Length [m]/Length [rad] LEN/LEN real
Component Outputs
Description [Unit] Parameter Name Data Type
Displacement [m]/Angle [rad] S/PHI real
Force [N]/Torque [Nm] F/M real
Velocity [m/s]/Angular Velocity [rad/s] V/OMEGA real