SIMPLORER User Manual V6.0 - FER-a

3
5
42 General Modeling Functions
Add Ons Tab
The «Add Ons» tab provides advanced model libraries for different application fields. You find
the model descriptions in the SMPLORER online help. The Compatibility library is required to
use simulation sheets of former versions.
Advanced Libraries:
• Electric power components (power6.smd)*
• Set of components suited for needs of the automotive industry (automotive6.smd)*
• One-Dimensional Mechanical System Module (mechsim6.smd)*
• Hydraulic components (hydraulic6.smd)*
• Library with machine models (*_ist6.smd)*
• Nonlinear transmission and linear transmission components (transfer6.smd)
Interfaces:
• ECE (equivalent circuit extraction) Maxwell interface (interface.smd)
• RMxprt interface (interface.smd)
• Full-Wave SPICE interface (interface.smd)
• Mathcad interface (interface.smd)
• Matlab/Simulink interface (interface.smd)*
Compatibility:
• SIMPLORER 4: Semiconductors device level of former SIMPLORER versions
• Digital: Digital Basic Gates in different modeling levels (NAND, NOR, …).
• Magnetic: Elements for nonlinear magnetic circuit modeling.
• Function Blocks: Functional blocks libraries (Integrator, Frequency Doubler…).
• Lines: Macros, based on the gamma equivalent circuit, to simulate line segments.
*These libraries are optional (not included in the basic SIMPLORER package).
Tools Tab
The «Tools» tab provides components to calculate coordinate transformations, components
to connect conservative nodes from different natures, and components to connect different
data types. You find the model descriptions in the SMPLORER online help.
Manufacturers Tab
The «Manufactures» tab provides libraries with semiconductor device level models of different
manufactures. You find the model descriptions in the SMPLORER online help.
Analog Devices, Fuij, Maxim, International Rectifier, Siemens, Semicron… and other manufacturer
libraries with pre-parameterized components.
Users Tab
The «User» tab provides a location to insert user-defined libraries. You can insert your own
libraries also in all other tabs.
Projects Tab
The «Project» tab provides libraries included in an opened project. This tab is only available
if you work with a project. When you use the PROJECT>COPY command in the SSC Commander,
libraries in these tab are considered as project files and added to the copied project.