SIMPLORER User Manual V6.0 - FER-a

11
348 Schematic Environment
Setting the Display for all Components
Sheet Menu �
Parameter names
Component name
Name
Value
Name:= Value
Complete
Name Value
Name:=Value Info
Value Info
Pin names
Name at
No display Symbol
Name
The options in SHEET>PROPERTIES «Sheet» sets the sheet properties itself as well as the displays
for names and parameters of components. For parameter and pin names you can select
«Show Never», «Show as in Library», or «Show Always». The settings are applied to just
dropped components, not to components which are already on sheet.
In addition, you can change the settings of nature colors. Please note: You can only change
the wiring color, not the color of component symbols.
The option «Use as Default» applies the settings defined in the dialog to all new model
sheets.
� �
�
�
�
�
Command Description
DETERMINE BLOCK
SEQUENCE
�
�
�
�
�
Grid
Component (model) name
Scale � Parameter displays
Tool Tip � Selection Color
Pin name Blind Out Color
�
�
Determines the signal direction in block diagrams. See also “Modeling
with Block Diagrams” on page 201.
PAGE SIZE Defines print page size. See also 11.1 “File Management in Schematic”
on page 339.
�