SIMPLORER User Manual V6.0 - FER-a

SIMPLORER 6.0 — Manual 485
a. Select «One Library» to create or
open a single library for the new
models:
1. Click the button to create or
open a library for the new models.
2. Enter a new name to create a new
library, or browse for a .smd file to
open an existing library.
3. Click to install the new
models.
The library with the defined name is inserted in the in «User» tab of the Model Agent.
b. Select «Corresponding Manufacturer Libraries» to install multiple libraries:
1 Click to install the new models. The libraries with the name
manufacturer_name.smd are inserted in the in «Manufacturers» tab of the Model Agent.
Converting 4.x Libraries
Libraries from former versions of SIMPLORER (4.x) cannot be used in version 6.0 without being
converted.
To convert a library from a previous version:
1 Click FILES>CONVERT 4.X LIBRARY.
2 Select the old library, and define a new name and location.
3 Specify whether the library is only for your own local use («Local») or for all users on a network
(«Public»). When «Public» is selected, mapping tables are shared. When «Local» is
selected, an additional dialog box opens, asking you to enter the path for the mapping
file.
4 If an ambiguous model definition causes error messages during the conversion process,
do one of the following:
a. To insert the model in the new library anyway, click «Insert Element» or «Insert all Elements».
b. To leave that model out of the new library, click «Skip Element» or «Skip all Elements».
5 To edit the model text, click . Model text can only be edited if the SML text is not
encoded.
6 Click .
When you start a second conversion run for a library, the created mapping information of the
first run is used.
The successful conversion depends on the settings in the original SML text of the 4.x library.
Please contact SIMPLORER support if problems occur.