SIMPLORER User Manual V6.0 - FER-a

Trapezoidal Wave
>>Basics>Tools>Time Functions
1
yt () = AMPL ⋅ trapez⎛360° ⋅ --------------------- ⋅ t + PHASE⎞
+ OFF
⎝ TPERIO
⎠
TPERIO = TRISE + TFALL + PWIDTH
�
�
� � �
�
SIMPLORER 6.0 — Manual 281
TDELAY
TRISE
PWIDTH
TFALL
OFF
AMPL
Dialog Settings
� � «Period [s]»
If the box is checked, the period is defined by the value entered in the input filed, otherwise
the period is 1/frequency.
«Delay [s]»
Defines the initial delay of the trapezoidal function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
«Phase [deg/rad]»
Defines the phase shift of the trapezoidal function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� «Angular Dimension»
In the list, select radians or degrees. The dimension is applied to the phase.
«Offset»
Defines the phase offset of the trapezoidal function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� «Periodical»
In the list, select «Yes» for a periodical trapezoidal function; select «No» for carrying out only
one period corresponding to the defined frequency. After them the trapezoidal function is '0'.
«Rise Time»«Fall Time»«Pulse Width»
Defines the rise and fall time and the pulse width. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
Click the button to display the trapezoidal function with the defined values. Please note: If
you use variables for the definition, the preview is empty.
�
�
�
�
�
�
t