SIMPLORER User Manual V6.0 - FER-a

3.6 Modifying Component Parameters
SIMPLORER 6.0 — Manual 65
The names and parameters of components and simulation parameters in a simulation model
can be modified with different tools and functions. You have the following choices:
• the Object Browser
• the property dialogs and input wizards of individual components
• the name and parameter displays on the sheet
• the EDIT>SEARCH/REPLACE command
• the EDIT>COPY DATA FROM… command
3.6.1 Editing Names and Parameters of Components on the Sheet
Editing Displays
In addition to the Object Browser, the parameter dialogs and the component wizards, parameters
can be edited directly on the sheet through the display elements. To do this, the name
or parameter value must be displayed (click the element with the right mouse button, choose
«Properties», and select the display settings). To edit in a display element, click the field
twice (but not double-click). The edit mode is active, and you can modify the entries.
1 For an element with displays for names and parameters, open
the Properties or Parameters dialog to display names and parameters.
2 Click the display of a parameter. The name is highlighted in
yellow.
3 Click a second time the display; the edit mode is active, and
you can enter new value.
4 Click outside of the display. The modification is applied.
Starting Edit Mode with the F2 Key
The F2 key starts the edit mode
for selected text elements on the
sheet. Changes can then be entered
directly on the sheet.
Text element
Connection name
Component name
Parameters