SIMPLORER User Manual V6.0 - FER-a

14.1.3 Creating Graphical Representations
SIMPLORER 6.0 — Manual 427
There are two ways to create graphics for tables containing simulation data:
• Using all data channels in a table.
Use the «Display as 2D-Graphic» command on the table’s shortcut menu in conjunction
with the Object browser.
• Using selected data channels in a table.
Use the VIEW>2D-GRAPHIC NEW command.
Creating a Graphical Representation with Defined Data Channels
In the 2D-GRAPHIC NEW dialog, select the data channels to assign to the X- and Y- axis in a
coordinate system.
Select the source file
Select data channel
for X-axis
Select data channels
for Y-axis
(double-click or )
Data set
The drop-down list shows the loaded result files for the selected analysis. Click the desired
data set to select it.
X-axis
Selects one data channel for the X-axis.
Y-axis
Selects multiple data channel for the Y-axis. To add a data channel to the graphic, select the
data channels in the list and click , or double-click the array entry.
Visible Channels
Lists data channels for the Y-axis. To remove a data channel from the graphic, select the data
channel in the list and click , or double-click the entry.
Removes the display for marked channels.
Saves the active settings.
Closes the dialog box without saving the changes.