SIMPLORER User Manual V6.0 - FER-a

3.3 Creating Simulation Models
Start
Schematic
Select
Basics
Select
Component
Place
Component
Continue?
no
Connect
Components
Select
Component
Enter
Component
Properties
Continue?
no
Specification
of Simulation
Parameters
Save
the Model
yes
yes
SIMPLORER 6.0 — Manual 39
• Click the desired tab in the Installed Libraries window.
• Select the component in the Available Components window.
• Drag the component with pressed mouse button onto the sheet
(Drag-and-Drop).
• The selected component can be rotated (R key) or flipped (F key).
• Start the CONNECT>WIRE mode.
• Place the cross wires on the element pins.
• Set beginnings, corners, and ends of the wire with the mouse.
• Exit the wire mode with ESC key.
• Select component with the mouse.
• Open the shortcut menu with right mouse button.
• Enter parameters and outputs in «Properties».
• Click with the right mouse button in the sheet itself (not on any of
the components).
• Enter simulation parameters in «Simulation Parameters».
• Save Simulation model:
FILE>SAVE AS name.ssh
The terms component, model, and element are easily confused. In general, a simulation model,
represented by a sheet, consists of components, elements, and simulation parameters.
Simulation
Model
Components Smallest parts of a complete simulation model (internal components,
C models, macros).
Elements Displays, connections, name and parameter displays of components
on the sheet, drawing elements, text elements.
Simulation Simulation settings for the simulator and compiler.
parameters