SIMPLORER User Manual V6.0 - FER-a

Editing Diagram Settings
SIMPLORER 6.0 — Manual 391
The diagram settings are defined in the EDIT>COORDINATE SYSTEM menu. You can start the
commands also with the shortcut menu of the diagram.
X Axis/Y Axis Tab
Linear or logarithmic representation and values to define minimum and maximum of the axes.
The function sets the axes to the values defined in the simulation model.
The edit buttons apply a factor to both minimum and maximum values of the corresponding
axis.
Generations Tab
Settings for generations created of experiments runs can be modified in this dialog. Please
note: The option «Show» must be selected to display the generation settings.
12.3.3 View Tool Settings
Options Menu �
The View Tool provides numerous settings for the representation of simulation results; as well
as for single simulation runs and experiment runs. In addition, there are settings for the print
page layout (header, footer, and margins). You can define all the settings within the OPTIONS
menu of the View Tool. With the SIMPLORER standard values can be restored.
Command Description
SETTINGS This menu includes the options for screen representation, printer
adjustment and saving simulation results. See also “Options for
Storage of Simulation Data” on page 387.
With the SIMPLORER standard values can be restored.
EXTENDED This menu includes the screen and print color options for runs in
an experiment (generations).
Defining Screen Settings
This settings includes the options for screen representation, for example diagram elements,
grid lines, colors, and scaling. With the SIMPLORER standard values can be restored.
Representation Tab
Representation
Shows or hides the coordinate system elements border, grid lines, legend, X-axis, or Y-axis.
Inscription
Shows or hides the inscription of: the X-axis (bottom or top) and the Y-axis (left or right). Sets
the font for the inscription of the axis.