substitution request - Alliance Construction Solutions

5. Corner Blocks: Glued and fastened in each of four top corners to maintain
cabinet squareness and rigidity.
M. Construction for drawer units as follows:
1. Drawer Body: Not less than 3/8 inch thick vinyl faced particle board
subfront, back, and sides. Provide box-type construction with subfront and
back rabbeted into sides and secured with glue and mechanical fasteners.
Exposed fronts fastened to subfront with mounting screws from interior of
body. Drawer bottom of not less than 1/4 inch thick hardboard, set into
rabbets in back, sides, and front.
N. Millwork Hardware:
1. Manufacturers
a. Corbin Russwin Architectural Hardware (800-543-3658)
b. Epco Engineered Products Co. (810-767-2050)
c. Garcy Corp., (708-345-2500)
d. Grant Hardware, Hettich America LP (800-777-1772)
e. H.B. Ives, (203-294-4837)
f. Knape & Vogt Manufacturing Co. (800-253-1561) (KV)
g. Stanley Hardware, Div. of the Stanley Works (800-337-4393)
h. Grass America (800-334-3512)
O. Products: Coordinate finishes of exposed cabinet hardware with adjacent finish
hardware as specified in Section 08 7100.
2.6 SHOP FINISHING
A. Finish architectural woodwork at fabrication shop. Defer only final touchup, cleaning,
and polishing until after installation.
B. Backpriming: Apply one coat of sealer or primer, compatible with finish coats, to
concealed surfaces of woodwork. Apply two coats to back of paneling.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Before installation, condition woodwork to average prevailing humidity conditions in
installation areas. Examine shop-fabricated work for completion and complete work as
required, including removal of packing and backpriming.
B. Grade: Install woodwork to comply with requirements for the same grade specified in
Part 2 for fabrication of type of woodwork involved.
C. Install woodwork level, plumb, true, and straight to a tolerance of 1/8 inch in 96
inches. Shim as required with concealed shims.
D. Scribe and cut woodwork to fit adjoining work, refinish cut surfaces, and repair
damaged finish at cuts.
Project No.: 10145 INTERIOR ARCHITECTURAL WOODWORK
550 15th Street Dual Brand Hotel 064023 - 6
19 March 2012