substitution request - Alliance Construction Solutions

PART 2 - PRODUCTS
A. Tub / Shower Surround:
1. Manufacturers:
a. Basis-of-Design: Mincey Marble Manufacturing, Inc.
b. Introsul
c. Project Stone
d. MPL Corporation
2. Model No.: TS-DS
3. Matte finish with diamond design.
4. Provide 2 surface mount soap dishes (including one corner mount) and 2-inch
trim pieces.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine substrates and conditions, with Installer present, for compliance with
requirements for installation tolerances and other conditions affecting performance of
the Work. Proceed with installation only after unsatisfactory conditions have been
corrected.
3.2 PREPARATION
A. Clean substrates of substances that could impair bond of adhesive, including oil,
grease, dirt, and dust.
3.3 INSTALLATION
A. Install units according to manufacturer's written instructions.
B. Install components in accordance with reviewed shop drawings and plans.
C. All materials to be plumb, level and rigid. Neatly scribe to adjoining surfaces. Field
trim all components as needed to fit field conditions.
D. Immediately replace any material that is cracked, chipped, broken or otherwise
defective.
3.4 CLEANING
A. Contractor to protect all finished work until final acceptance by Owner.
B. Clean installed units not more than 48 hours prior to Date of Substantial Completion.
Repair or replace damaged or stained cast marble work.
Project No.: 10145
END OF SECTION 06 6115
CAST MARBLE
550 15th Street Dual Brand Hotel
19 March 2012
066115 - 2