substitution request - Alliance Construction Solutions

PART 1 - GENERAL
1.1 SUMMARY
A. This Section includes the following:
SECTION 09 6816
SHEET CARPETING
1. Preparation of Surfaces to Receive Carpeting.
2. Carpet.
a. Furnished by Owner, installed by Contractor.
b. Stretch-in Installation, unless noted otherwise.
3. Carpet cushion.
a. Furnished by Owner, installed by Contractor
4. Accessories, including tack strips, adhesives tapes and all other required
accessories.
5. Transition edges
1.2 SUBMITTALS
A. Product Data: For the following, including installation recommendations for each type
of substrate:
1. A copy of the manufacturer's printed installation manual shall accompany Bid for
review and approval by the Owner's Representative.
2. Shop Drawings showing layout and seaming diagrams. Indicate pile or pattern
direction and locations and types of edge strips. Indicate columns, doorways,
enclosing walls or partitions, built-in cabinets, and locations where cutouts are
required in carpet. Show installation details at special conditions.
1.3 QUALITY ASSURANCE
A. Installer Qualifications: Firm with not less than 5 years of experience in installation of
commercial carpeting of type, quantity, and installation methods similar to work of this
Section, or can demonstrate compliance with its certification program requirements.
B. Successful vendor shall be responsible for field measurements to determine carpet
layout.
C. The carpet contractor is responsible for reviewing carpet manufacturer's published
installation instructions prior to installation. This includes understanding dye lots,
pattern sequencing, pattern matching and any special instructions. Failure to abide by
the manufacturer's instructions could result in a backcharge to contractor for corrections
to the installation.
Project No.: 10145 SHEET CARPETING
550 15th Street Dual Brand Hotel 096816 - 1
19 March 2012