25.12.2012 Views

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

PART 1 – GENERAL<br />

1.01 DESCRIPTION OF WORK:<br />

Project No.: 10145<br />

550 15 th Street Dual Brand Hotel<br />

03/16/2012<br />

SECTION 221119<br />

DOMESTIC WATER PIPING SPECIALTIES<br />

A. This Section specifies the water distribution piping system, including potable cold, hot, and<br />

recirculated hot water piping, fittings, and specialties within the building to a point five feet<br />

outside the building.<br />

B. Products installed but not furnished under this Section include water meters which will be<br />

provided by the local utility, to the site, ready for installation. The following is the name<br />

and address of the local utility:<br />

Denver Water<br />

1600 W. 12 th Ave.<br />

Denver, CO 80204-3412<br />

C. Related Sections: The following sections contain requirements that relate to this Section:<br />

1.02 DEFINITIONS:<br />

1. Refer to Division 2 and/or Division 22 for below-grade water service piping from<br />

public utility water main to building.<br />

2. Refer to Division 2 and/or Division 22 for materials and methods of trenching and<br />

backfilling for underground piping installations.<br />

3. Refer to other Division 22 sections for piping materials; methods for sealing pipe<br />

penetrations through basement walls and fire and smoke barriers; thermometers,<br />

flow meters and pressure gauges; mechanical identification; plumbing pumps;<br />

and dielectric unions, strainers and pressure regulating valves.<br />

A. Water Distribution Piping: Piping within the building or on the premises which conveys<br />

water from the water service piping or meter to the points of usage.<br />

B. Water Service Piping: Piping from the water main or other source of potable water supply<br />

to the water distribution system of the building served.<br />

C. Pipe sizes used in this Specification are Nominal Pipe Size (NPS).<br />

1.03 SUBMITTALS:<br />

A. Refer to Division 1 and Basic Mechanical Requirements for administrative and procedural<br />

requirements for submittals. Submit the following:<br />

1. Data for each piping specialty and valve specified.<br />

2. Certification of Compliance with ASME and UL fabrication requirements.<br />

3. Test reports specified in Part 3 of this Section.<br />

4. Manufacturer and product data for lead-free solder, with material breakdown.<br />

221119 - 1 DOMESTIC WATER PIPING<br />

SPECIALTIES

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!