substitution request - Alliance Construction Solutions

L. Install all mechanical equipment in such a manner as to facilitate maintenance and repair
or replacement of equipment components. As much as practical, connect equipment for
ease of disconnecting, with minimum of interference with other installations.
M. Coordinate connection of mechanical systems with exterior underground and overhead
utilities and services. Comply with requirements of governing regulations, franchised
service companies, and controlling agencies. Provide required connection for each
service.
N. The Contractor shall provide all labor and material required for all necessary ancillary
work, including, but not limited to, the starting/stopping of all mechanical equipment,
opening/closing of all valves, draining/refilling of all mechanical systems and
operating/verifying the operation of all mechanical systems and controls as required to
accomplish all work necessary to meet construction document requirements.
O. Drawings are not intended to show complete or accurate details of buildings, equipment,
ductwork and piping in every respect. They indicate general layout, approximate
locations, relations and arrangements and are not intended to show details of
manufacturer’s equipment. Details of equipment shall be furnished by manufacturer and
Contractor for Architect/Engineer’s review.
P. Not all details of piping systems are shown on drawings nor are they specified herein.
Piping shall be such as to legally pass all inspections by the local Inspection Department,
State and Federal Authorities and Insurance Company having jurisdiction. Any changes or
additions which may be necessary to obtain such inspection and approval shall be made
by the Contractor as a part of this Contract without additional cost to the Owner.
Q. Unless otherwise indicated, all equipment and performance data listed is for job site
conditions (elevation 5,280 ft.).
1.13 EXCAVATING AND BACKFILLING:
A. General:
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
1. Provide all necessary excavation and backfill for installation of mechanical work in
accordance with Division 21,22 and 23 (beneath building and 5’-0” beyond)
B. Contact Owners of all underground utilities to have them located and marked, at least 2
business days before excavation is to begin. Also, prior to starting excavation, brief
employees on marking and color codes, and train employees on excavation and safety
procedures for natural gas lines. When excavation approaches gas lines, expose lines by
carefully probing and hand digging.
1.14 CUTTING AND PATCHING:
A. This Article specifies the cutting and patching of mechanical equipment, components, and
materials and includes removal and legal disposal of selected materials, components, and
equipment.
B. Portable ventilation fans shall be provided for any procedure which generates smoke, dust,
dirt, etc.
23 0010 - 6 BASIC MECHANICAL REQUIREMENTS