25.12.2012 Views

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

a. Accessible Doors: Smooth surfaced for width of door in area within 10<br />

inches above floor or ground plane.<br />

B. Entrance Door Hardware: Additional hardware specified in Division 08 Section<br />

"Guestroom Locking System."<br />

2.6 ENTRANCE DOOR HARDWARE<br />

A. General: Provide entrance door hardware for each entrance door to comply with<br />

requirements in this Section.<br />

1. Entrance Door Hardware Sets: Provide quantity, item, size, finish or color<br />

indicated, and products complying with BHMA standard referenced.<br />

2. Opening-Force Requirements:<br />

a. Egress Doors: Not more than 15 lbf to release the latch and not more<br />

than 30 lbf to set the door in motion.<br />

b. Accessible Interior Doors: Not more than 5 lbf to fully open door.<br />

B. Opening-Force Requirements:<br />

1. Latches and Exit Devices: Not more than 15 lbf required to release latch.<br />

C. Butt Hinges: BHMA A156.1, Grade 1, radius corner.<br />

1. Nonremovable Pins: Provide set screw in hinge barrel that, when tightened into<br />

a groove in hinge pin, prevents removal of pin while entrance door is closed.<br />

2. Exterior and Pool Room Hinges: Stainless steel, with stainless-steel pin.<br />

3. Quantities:<br />

a. For doors up to 87 inches high, provide 3 hinges per leaf.<br />

D. Panic Exit Devices: BHMA A156.3, Grade 1, listed and labeled by a testing and<br />

inspecting agency acceptable to authorities having jurisdiction, for panic protection,<br />

based on testing according to UL 305.<br />

1. See Division 08 Section “Guestroom Locking System.”<br />

E. Strikes: Provide strike with black-plastic dust box for each latch or lock bolt; fabricated<br />

for aluminum framing.<br />

F. Operating Trim: BHMA A156.6.<br />

G. Surface-Mounted Holders: BHMA A156.16, Grade 1.<br />

1. Provide with SRI finish at pool room.<br />

2. Provide with overhead stop.<br />

H. Weather Stripping: Manufacturer's standard replaceable components.<br />

1. Compression Type: Made of ASTM D 2000, molded neoprene, or<br />

ASTM D 2287, molded PVC.<br />

Project No.: 10145 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS<br />

550 15th Street Dual Brand Hotel 084113 - 5<br />

19 March 2012

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!