substitution request - Alliance Construction Solutions

PART 1 – GENERAL
1.01 DESCRIPTION OF WORK:
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
SECTION 22 4100
PLUMBING FIXTURES
A. Provide a complete plumbing system as indicated on the drawings and as specified herein,
consisting of, but not limited to, plumbing fixtures and trim, rough-in, setting, and
connections.
1.02 RELATED WORK SPECIFIED ELSEWHERE:
A. Permits, Tap Fees, and Basic Piping Materials and Methods.
1.03 QUALITY ASSURANCE:
A. Codes and Standards:
1. Local plumbing code and/or ordinances.
2. International Plumbing Code.
3. Regulations of water and/or sewer agencies having jurisdictional control of the
area in which the project is to be constructed.
4. ASHRAE Standard 18: “Method of Testing for Rating Drinking-Water Coolers with
Self-Contained Mechanical Refrigeration Systems.”
5. ARI Standard 1010: “Drinking Fountains and Self-Contained Mechanically-
Refrigerated Drinking-Water Coolers.”
6. ANSI Standard A117.1: “Specifications for Making Buildings and Facilities
Accessible To and Usable By Physically Handicapped People.”
7. Public Law 90-480: “Architectural Barriers Act of 1968.”
8. UL Standard 399: “Drinking-Water Coolers.”
9. Public Law 101-336: “Americans with Disabilities Act” (ADA).
10. NSF Standard 61: “Drinking Water Components.”
11. Energy Conservation Act – 1992: “Energy Conservation Standards.”
B. Where fixtures are specified as handicapped-accessible, it shall be the sole responsibility of
all manufacturers and/or suppliers to provide plumbing fixtures and related trim which
meet or exceed the ADA requirements.
1.04 SUBMITTALS:
A. Product Data: Submit Product Data and installation instructions for each fixture, faucet,
specialty, accessory and trim specified; clearly indicate rated capacities of selected models
of water coolers.
B. Shop Drawings: Submit rough-in drawings with brand names for each item on each
sheet. Detail dimensions, rough-in requirements, required clearances, and methods of
assembly of components and anchorages. Coordinate requirements with Architectural
22 4100 - 1 PLUMBING FIXTURES